Pioneer VSX-D509S Direct Function, 3Press 9, 8, then, 1Press SETUP and hold for three seconds

Preparations

Direct Function

The direct function is a useful feature which allows you keep the receiver in one function (for example, CD) while putting the remote control in a different function. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

When the DIRECT function is ON any MULTI CONTROL button you press will change the function of both the receiver and the remote control. When you turn the DIRECT function OFF, you can operate the remote control without affecting the receiver. Thus you could switch the remote control the VCR and operate that component while the receiver plays a different component.

MULTI CONTROL

DVD	TV	VCR	CD-R
	MULTI CONTROL
RCV	CD	TUN	TVC
1		2	3	3

2	MIDNIGHT	5.1CH	ATT
	4	5	6
	SIGNAL SELECT		EFFECT

7	8	9	9
+10		DISC

0	ENTER	8
TV CONTROL

TV

VSX-D509S

To set a multi-function button to DIRECT OFF:

1Press SETUP and hold for three seconds.

The LED will blink twice.

2Press the MULTI CONTROL button which you want to set to OFF.

7￿ 4￿ ¢￿

2 DSP TEST TONE

CH SELECT CH LEVEL FL DIMMER

3Press 9, 8, then 3.

The LED blinks twice to indicate the button has been cleared.

LOUDNESS FUNCTION MUTING SETUP

SET UP To set a multi-function button to DIRECT ON:

ë￿

MULTI CONTROL

DVD/LD TV/SAT VCR/DVR CD

CD-R/

RECEIVER TUNER TAPE/MD TVCONT

2	2 DSPMODE MIDNIGHT 5.1CH
	1	2	3	4

CHANNEL	TEST	ATT	SIGNAL
SELECT	TONE		SELECT
5	6	7	8
CHANNEL		EFFECT
LEVEL
9	0	à	ENTER
		10	DISC
	FUNC		CH
VOL	TV CONTROL		VOL
	FQ
ST		ST
	ENTER		TOP
MENU
			MENU
	FQ
SOURCE CLASS		MPX	BAND
	7￿	8￿		3
D.ACCESS		CHANNEL
1￿	Á￿		4￿	¢￿
LOUDNESS FUNCTION		MUTING
RECEIVER	FL	REMOTE MASTER
	DIMMER	SETUP	VOLUME

AUDIO/VIDEOPRE PROGRAMMED

1Press SETUP and hold for three seconds.

The LED will blink twice.

2Press the MULTI CONTROL button which you want to set to ON.

3Press 9, 8, then 2.

The LED blinks twice to indicate the button has been cleared.

memo TV CONT doesn’t have this feature and thus can’t use the DIRECT

3 FUNCTION.

VSX-D409

1To turn the DIRECT function OFF (the default setting is ON), press REMOTE SET UP and number button 3 at the same time.

REMOTE	2 To turn the the DIRECT function ON (if you
SET UP	have turned it off), press REMOTE SET UP and
	number button 2 at the same time.
	memo TV CONT doesn’t have this feature and thus can’t use the DIRECT
	FUNCTION.

28