Pioneer VSX-D409, VSX-D509S manual 4Point the remote toward the component to, Set up, Preparations

Preparations

4Point the remote toward the component to

be controlled, enter the 3 digit setup code.

When you enter the setup code, the remote emits a power ON/ OFF signal. If the component turns ON or OFF, you have entered the proper code.

If the component does not turn ON or OFF and there is more than one setup code, press @ or # to select another code in step 3 or try inputting another code (starting again from step 2).

Some manufacturers use several sets of remote control signals and the first code may not correspond to your component.

dB	dB
dB	dB

Repeat steps 2 through 4 to assign preset codes for as many components as necessary.

5Press REMOTE SET UP to exit the preset mode.

The remote control returns to the previous operation mode.

•When operating a PIONEER DVD/LD player, set the manufacturer code to “111” in the preset mode.

•All codes enrolled in the manufacturer code list can be set even if a code is not displayed.

•TUNER cannot be preset.

•If no commands are entered the receiver automatically exits the preset code mode after 20 seconds.

Set up

25