Samsung LS22WJNKFUEDC manual Refer to the Preset Timing Modes

Models: LS22WJNKFUEDC

1 56
Download 56 pages 35.65 Kb
Page 43
Image 43

I cannot see the On Screen Display.

The screen shows strange colors or just black and white.

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

frequency that the monitor can handle properly.

If the display exceeds SXGA or 75 Hz, a "Not Optimum

Mode","Recommended mode

1680 x 1050 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode 1680 x 1050 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press a key on the keyboard to activate the monitor and restore the image on the screen.

If there is still no image, press the '' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Unlock the OSD by pressing the [MENU / ] button for at least 5 seconds.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen is out of focus or OSD cannot

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

Have you adjusted the resolution or

Adjust the resolution and frequency

frequency on the monitor?

of the video card.

Page 43
Image 43
Samsung LS22WJNKFUEDC manual Refer to the Preset Timing Modes