Pioneer DEH-P790BT Assigning preset numbers, Making a call by entering phone number

	Section
Operating this unit	02

#You can scroll the name and phone number by pressing and holding DISPLAY.

#If you do not operate anything within about 30 seconds, the list display is canceled automati- cally.

Calling a number from the Call History

1Display the list and select a phone num- ber.

Display the phone number you want to make a call.

Refer to Displaying the Call History on the pre- vious page.

2Press MULTI-CONTROL to make a call.

While calling, the phone number is displayed.

# If the number is already in the Phone Book then the name is also displayed.

3To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

Assigning preset numbers

Important

To perform this operation, be sure to park your ve- hicle and apply the parking brake.

Numbers that you dial frequently can be as- signed to presets for quick recall.

1Select a desired phone number from the Phone Book or the Call History.

To select a desired phone number from the Phone Book or the Call History, see the in- structions explained in previous pages.

2Press one of 0 to 9 on the remote con- trol and hold until the beep sounds.

The selected phone number has been stored in memory. The next time you press the same preset button, the phone number is recalled from memory.

Making a call by entering phone number

English

Calling an international number from the Call History

When calling an international number stored in the Call History, proceed the country code with a +.

1Display the phone number you want to make an international call.

Refer to Calling an international number from the Call History on this page.

2Press and hold MULTI-CONTROL to add

+.

# To delete +, press and hold MULTI-CONTROL again.

3Press MULTI-CONTROL to make a call. While calling, Dialling is flashing.

4To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

Important

To perform this operation, be sure to park your ve- hicle and apply the parking brake.

1Use MULTI-CONTROL to select

Number dial in the function menu.

# You can also press DIRECT on the remote con- trol to enter in this menu from the standby dis- play.

2Push MULTI-CONTROL up or down to

select a number.

# You can also input numbers by pressing 0 to 9 on the remote control.

3Push MULTI-CONTROL left or right to move the cursor to the previous or next po-

sition.

# Up to 24 digits can be entered.

4When you completed entering the number, press MULTI-CONTROL.

En 37