![](/images/new-backgrounds/1046725/4672593x1.webp)
Operating this unit
Section
02
2Press
verse mode on.
# To turn the reverse mode off, press
Note
You can also turn on or off reverse mode by press- ing BAND while this unit is turned off. For more details, see Reverse mode on page 9.
Switching the Ever Scroll
When Ever Scroll is set to ON, text information recorded on CD or iPod scrolls continuously in the display. Set to OFF if you prefer the infor- mation to scroll just once.
1Use
2Press
Scroll on.
# To turn the Ever Scroll off, press
Activating the BT Audio source
You need to activate the BT Audio source in order to use a Bluetooth audio player.
This setting is set to on by default. If you do not use BT Audio, you can turn it off.
1Use
BT AUDIO.
2Press
BT Audio source on.
# To turn the BT Audio source off, press
# If you turn the BT AUDIO in the initial settings off, the history of the most recently connected Bluetooth audio stored in this unit is cleared.
Entering PIN code for Bluetooth wireless connection
To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.
!With some Bluetooth audio players, you may be required to enter to this unit in ad- vance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.
1Use
2Push
select a number.
# You can also press 0 to 9 on the remote con- trol to select a number.
3Push
4After inputting PIN code (up to 16 di- gits), press
unit.
# Pushing
display, and you can change the PIN code.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the beginning, PIN code cannot be stored in mem- ory.
Editing device name
You can edit the device name.
The device name is set to Pioneer BT unit as default.
1Use
English
En 47