Connecting and Using a Source Device

Connecting the Product to a PC as a USB HUB

NOTE

The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC.

1.Connect the USB cable to PC IN on the back of the product and USB on the PC.

2.Using the product as a hub, connect and use various source devices with the product at the same time.

•A PC cannot connect to multiple source devices at the same time as it has a limited number of input/output ports available. The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC.

•If source devices are connected to the PC, the numerous cables around the PC can get tangled and look messy. Connecting them directly to the product will resolve this.

(PC IN)

USB

USB USB

NOTE

•  An external mass-storage HDD requires external power supply. Be sure to connect it to a power source.

Driver Installation

NOTE

•  You can set the optimum resolution and frequency for this product by installing the corresponding drivers.

•  An installation driver is contained on the CD supplied with the product.

•  If the provided file is faulty, visit the Samsung Electronics homepage (http://www.samsung.com) and download the file.

1.Insert the user manual CD provided with the product into the CD-ROM drive.

2.Click "Windows Driver."

3.Follow the instructions given on the screen to proceed with installation.

4.Select your product model from the list of models.

5.Go to Display Properties and check that the resolution and refresh rate are appropriate. Refer to your Windows OS manual for further details.

33