Preparation

 

 

 

 

 

 

 

 

 

 

 

 

Parts

 

 

 

 

 

Icons

 

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn the power on or off.

 

 

 

 

 

 

 

 

 

 

Front Buttons

 

 

The power indicator will be lit when the product is operating normally.

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

 

The color and shape of parts may differ from what is shown. Specifications are subject to

 

 

•  For details on the power-saving function, refer to “Power-saving Function” in the

change without notice to improve quality.

 

 

 

product specifications.

 

 

 

•  To reduce power consumption, it is best to remove the power cable when not using

This is a touch-type button. Tap the button lightly with a finger.

 

 

 

 

 

the product for an extended period of time.

 

 

 

 

 

 

 

 

 

 

 

This product contains a power circuit unit causing the stand to generate heat. The heat

 

 

This button can be used to display/exit from the OSD menu. The button can

does not mean the product is defective.

 

 

 

 

also be used to go back to the previous menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To lock the OSD control, press and hold the [m] button for 10 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To unlock the OSD control, press and hold the [m] button for more than

 

 

 

 

 

 

m

10 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

 

 

 

 

 

 

If the OSD control is locked,

 

 

 

 

 

 

 

 

 

•  Brightness, Contrast, Image Size can be adjusted, and INFORMATION can be

 

 

 

 

 

 

 

 

 

viewed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Move down to another menu item or adjust a setting when the OSD menu is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

displayed.

 

 

 

 

 

 

 

 

 

Configure the Color Mode using the [

] buttons when no OSD menu is

 

 

 

 

 

 

 

 

displayed.

 

NOTE

•  For further details on Color Mode, refer to “Configuring Color Mode” in the section "Configuring the Tint Settings."

Confirm a menu selection.

Pressing the [] button when no OSD menu is displayed will change the input source (DVI, HDMI/MHL, DisplayPort).

A Speakers

 

NOTE

A message that shows the current input source will appear at the top left corner of the

screen each time you turn on the power or press the [] button to change the input source.

15