Samsung S34E790C LS34E790CNS/CH, LS34E790CNS/EN Configuring Image Size, PIP Mode, (available in PIP mode(Size / / )), Size, In PC mode, In AV mode, In PC mode, In AV mode, (available in PIP mode(Size / / ))

Configuring Image Size

PIP Mode

(available in PIP mode(Size / / ))

In PC mode

PIP/PBP
			Select the image
PIP/PBP Mode		On	size for each screen.
Size
Position
Sound Source
Source
	Auto
Image Size
	Wide
Contrast

In AV mode

PIP/PBP
			Select the image
PIP/PBP Mode		On	size for each screen.
Size
Position
	4:3
Sound Source
	16:9
Source
	21:9
Image Size
		Screen Fit
Contrast

-- The displayed image may differ depending on the model.

Select the image size for sub-screen.

1	When the Function Key Guide appears, select	by moving the JOG button UP. Next, press the JOG button.
2	Move to Screen controlling the JOG button UP/DOWN and press the JOG button.
3	Move to the PIP/PBP controlling the JOG button UP/DOWN and press the JOG button.
4	Move the JOG button UP/DOWN to select Image Size and then press the JOG button.

(available in PIP mode(Size / / ))

In PC mode

•• Auto: Display the picture according to the aspect ratio of the each screen input source.

•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.

In AV mode

•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.

•• 21:9: Display the picture of the sub-screen with an aspect ratio of 21:9.

•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off. ――The function may not be supported depending on the ports provided with the product.

――Changing the screen size is available when the following conditions are satisfied.

	-- A digital output device is connected using the HDMI/DP cable.
	-- The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
	these signals.).
	-- This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV.
5	Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6	The selected option will be applied.

49