Samsung T24B300EE Broadcast Audio Options, Additional Settings, Speaker Settings, Reset Sound (Yes / No), Basic Features, Audio, change, Dual f, change, Stereo, Dual f, Default

Basic Features

¦¦ Sound Systems, Etc.MENUm→ Sound → ENTERE

Broadcast Audio Options

■■ Audio Language
(digital channels only)
Change the default value for audio languages.✎✎ The available language may differ depending on the broadcast.■■ Audio Format

(digital channels only)

Select the audio format.■■ Audio Description
(not available in all locations) (digitalchannels only)

This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.

✎✎ Audio Description (Off / On): Turn the audio description function on or off.✎✎ Volume: Adjust the audio description volume.

Additional Settings

(digital channels only)

■■ DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.

✎✎ According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB.

✎✎ To increase or decrease the volume, adjust between the range 0 and -10 respectively.

■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

––Audio Format: You can select the Digital Audio output (SPDIF) format.

✎✎ The available Digital Audio output (SPDIF) format may differ depending on the input source.

––Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

✎It's not available for TB300 series.✎

■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

Speaker Settings

■■ Speaker Select (External Speaker / TV Speaker):A sound echo may occur due to a difference indecoding speed between the main speaker and theaudio receiver. In this case, set the TV to External Speaker.

✎✎ When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

✎✎ When Speaker Select is set to External Speaker. xx TV Speaker: Off, External Speaker: On

✎✎ When Speaker Select is set to TV Speaker. xx TV Speaker: On, External Speaker: On

✎✎ If there is no video signal, both speakers will be mute. ✎✎ It's not available for TB300 series.

■■ Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal.

Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.

Reset Sound (Yes / No)

Reset all sound settings to the factory defaults.¦¦ Selecting the Sound Mode tWhen you set to Dual fg, the current sound mode is displayed on the screen.

	Audio	Dual f-g	Default
	Type
A2	Mono	Mono	Automatic
	Stereo	Stereo ↔ Mono	change
Stereo
	Dual	Dual f ↔ Dual g	Dual f
	Mono	Mono	Automatic
NICAM	Stereo	Mono ↔ Stereo	change
Stereo	Dual	Mono ↔ Dual f	Dual f
		 Dual g 

✎✎If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono.

✎✎Only activated in stereo sound signal.✎✎Only available when the input Source is set to TV.

English 26