Samsung LT27B750EX/EN manual Switching between Anynet+ Devices, Listening through a Receiver

Advanced Features

Switching between Anynet+ Devices

1.Open the Tools menu using your remote, and then select Anynet+ (HDMI-CEC).

2.Select Device List. The Device List screen appears.

✎✎If you cannot find a device you want, select Refresh to refresh the list.

3.Select a device, and then wait until the switch to the selected device is completed.

✎✎The Device List menu appears only when you set Anynet+ (HDMI-CEC)to On in the System menu.

✎✎Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress.

✎✎If you have selected an Anynet+ device using the Source function , you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device using the Device List function.

Listening through a Receiver

You can listen to sound through a receiver (i.e. Home Theatre) instead of the product Speaker. To listen to sound through a receiver, go to Receiver screen (System → Anynet+ (HDMI-CEC)→ Receiver). Then select Receiver and set to On.

✎✎If your receiver supports audio only, it may not appear in the device list.

✎✎The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) port of the product.

✎✎When the receiver (i.e. Home Theatre) is set to on, you can hear sound output from the product’s Optical jack. When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you will hear only 2 channel sounds from the receiver.

Using the ARC function

You can listen to sound from the product through a receiver connected using an HDMI cable without connecting a separate optical cable. To listen to sound through a receiver using the ARC function, go to Receiver screen (System → Anynet+ (HDMI-CEC)→ Receiver). Then select Receiver and set to On.

✎✎To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDMI IN 2 (MHL / ARC) port.

✎✎To disable the ARC function, set the Receiver to Off. Even if the product transmits the ARC signal continuously, the receiver will be blocked from receiving the signal.

English - 164