Getting Started

Using the Control Panel

✎✎The product colour and shape may vary depending on the model. The product’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.

Selecting the Media Play

Selecting the Menu

m R

Selecting a Source

PReturn

Power off

Function menu

TV Controller

Remote control sensor

Power on

Adjusting the volume

Selecting a channel

Using the function menu

Selecting the MENUm

Selecting the MEDIA.P

Selecting the SOURCEs

Power off (P)

Turn the TV on by pressing the Controller when the TV is in standby mode.

Adjusts the volume by moving the controller from side to side when the power is on.

Select a channel by moving the Controller to the up and down directions when the power is on.

To view and use the Function menu, press and release the Controller when the power is on. To close the Function menu, press and release the Controller again.

With the Function menu visible, select the MENUm by moving the Controller to the left. The OSD (On Screen Display) Menu appears. Select an option by moving the Controller to the right. Move the Controller to the right/left/up/down directions to make additional selections. To change a parameter, select it, and then press the Controller.

With the Function menu visible, select MEDIA.P by moving the Controller to the up direction. The MEDIA.P main screen appears. Select an application by moving the Controller, and then pressing the Controller.

With the Function menu visible, open the SOURCEs by pushing the Controller to the right. The Source screen appears. To select a source, move the Controller back and forth. When the source you want is highlighted, press the Controller.

With the Function menu visible, select Power off (P) by pulling the Controller to the down direction, and then press the Controller.

✎✎To close the Menu, MEDIA.P or Source, press the Controller for more than 1 second.

✎✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Standby mode

Your product enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your product in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

Setup

The initial setup dialog appears when the TV is first activated.

Follow the on-screen instructions to finish the initial setup process, including menu language choice,

P

country choice, channel source choice, channel scan, and more.

At each step, either make a choice or skip the step.

Users can manually perform this process at a later time under the System > Setup menu. ✎✎The default PIN code is: 0-0-0-0.

English - 14