Preference Features

Using the Sleep Timer

MENU → System → Time → Sleep Timer → ENTERE

•• Sleep Timer: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes)

✎✎Use the ▲/▼ buttons to select a period of time, and then press ENTERE. To cancel the Sleep Timer, select Off.

Setting the On / Off Timer

MENU → System → Time → On Timer <or> Off Timer → ENTERE

•• On Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2, On Timer 3)

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer.

The cmark indicates the day you’ve selected. Time: Set the hour and minute.

Volume: Set the desired volume level.

Source: To select the source of the content that will play when the TV turns on. You can:

––Select TV and have the TV display a specific Terrestrial or cable channel.

––Select USB and have the TV play back photo or audio files from a USB device.

––Select a source on your TV (HDMI1, HDMI2/DVI, AV, Component, etc.) that you have connected a set-top box to, and have the TV display a channel from the set-top box.

✎✎The USB device must be connected to your TV before you can select USB. ✎✎If you select a source other than TV or USB, you must:

•• Have a cable or satellite set-top box attached to that source

•• Set the set-top box to the channel you want to watch when the TV goes on

•• Leave the set-top box turned on.

English - 54