Samsung LTN1785W manual Connecting to a Cable Box that Descrambles All Channels

Models: LTN1785W

1 68
Download 68 pages 14.24 Kb
Page 18
Image 18

victoryia 01-14 6/27/03 2:04 AM Page 9

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the

ANTENNA OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply, “OUT”.

2

Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN”, or simply, “IN”.

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

English-9

Page 18
Image 18
Samsung LTN1785W manual Connecting to a Cable Box that Descrambles All Channels