Installation
Attaching the Stand
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product.
1 | 2 | 3 | 4 |
Insert the stand neck into the stand base in the direction shown in the figure.
5
Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
Check that the stand neck is firmly connected.
6
Connect the power supply and the data cable as shown in the figure.
Tightly fasten the connecting screw at the bottom of the stand base.
-Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
19
