Setting Up Service

Setting Up Your Phone

1. Install the battery (if necessary).
nSlide the battery cover latch into its unlock position
and slide the battery cover downward to remove it.
nInsert the battery into the opening, making sure the
connectors align. Gently press down to secure the
battery.
nReplace the battery cover and press up until you hear
aclick. Lock the battery cover by sliding the latch into
its locked position.
2. Press to turn the phone on.
nYour phone will turn on, search for Sprint service,
and enter standby mode.
nIf your phone is not yet activated, or if it is locked, see
“Getting Started With Sprint Service”on the
following page for moreinformation.
3. Make your first call.
nUse your keypad to enter a phone number.
nPress .
Note Your phone’s battery should have enough charge to turn on
your phone, find a signal, set up your voicemail, and make a
call. You should fully charge your battery as soon as possible.
See “Charging the Battery”on page 25 for details.
Section 1A: Setting Up Service 3