TurningYour Phone On and Off
TurningYourPhoneOn
▶Press 
.
Once your phone is on, it may display “Looking for service...,” When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after five seconds of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint service by pressing any key (when your phone is turned on).
Tip
The Power Save feature conserves your battery power when you arein an area where there is no signal.
TurningYourPhoneOff
▶Press and hold 
for two seconds until you see the powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is charging).
