01-BN68-00437D-01Eng 9/24/03 3:58 AM Page 8
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model) To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial
-A cable television network
-A satellite network
Connecting a Set-Top Box, VCR, or DVD
-Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.
-If you wish to connect both the
Connecting a Computer
-Connect the 15 Pin
-Connect the stereo audio cable to the “Audio (ST)” jack on the rear of your set and the other end to the “Audio Out” jack of the sound card on your computer.
➣ 15 Pin
Pin | Separate H/V | Composite H/V |
|
|
|
1 | Red (R) | Red (R) |
2 | Green (G) | Green (G) |
3 | Blue (B) | Blue (B) |
4 | Grounding | Grounding |
5 | Grounding (DDC return) | Grounding (DDC return) |
6 | Grounding - Red (R) | Grounding - Red (R) |
7 | Grounding - Green (G) | Grounding - Green (G) |
8 | Grounding - Blue (B) | Grounding - Blue (B) |
9 | No connection | No connection |
10 | Grounding - Sync. / Self test | Grounding - Sync. / Self test |
11 | Grounding | Grounding |
12 | DDC - SDA (Data) | DDC - SDA (Data) |
13 | Horizontal Sync. | Horizontal/Vertical Sync. |
14 | Vertical Sync. | Not used |
15 | DDC - SCL (Clock) | DDC - SCL (Clock) |
|
|
|
