Samsung M1713/XET manual Installing Your Microwave Oven, Setting the Time M1733

Models: M1713/XET

1 72
Download 72 pages 62.03 Kb
Page 48
Image 48

Installing Your Microwave Oven

Place the oven on a flat, level surface strong enough to safely bear the weight of the oven.

GB

20 cm

10 cm

above

behind

 

10 cm

 

on the side

1When you install your oven, Make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind, on the sides of the oven and 20 cm (8 inches) of above.

2 Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable (I-SHENG SP022, KDK KKP4819D, EUROELECTRIC 3410,SAMIL SP-106B, MOONSUNG EP-48E). Contact your local dealer to have it replaced. The power cable of ISRAEL is PENCON(ZD16A), S/AFRICA APEX LEADS SA16 and NIGERIA, GHANA, KENYA and U.A.E is PENCON(UD13A1).

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

Setting the Time (M1733)

Your microwave oven has an inbuilt clock. The time can be displayed in either the 24-hour or 12-hour notation. You must set the clock:

When you first install your microwave oven

After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

 

 

 

1 To display the time in the...

Then press the

button...

 

 

 

 

24-hour notation

Once

 

 

 

 

 

 

 

 

 

 

 

 

12-hour notation

Twice

 

 

 

 

 

 

 

 

 

 

2Set the hour with the h button and the minutes with the min buttons.

3When the right time is displayed, press the button again to start the clock.

Result: The time is displayed whenever you are not using the microwave oven.

12SAMSUNG ELECTRONICS

Page 48
Image 48
Samsung M1713/XET manual Installing Your Microwave Oven, Setting the Time M1733, To display the time Then press Button

M1713/XET specifications

The Samsung M1713/XET is a versatile and compact mono laser printer designed for small to medium-sized offices that require a reliable and efficient printing solution. This printer offers a harmonious blend of speed, quality, and cost-effectiveness, making it an excellent choice for businesses looking to optimize their printing operations.

One of the standout features of the M1713/XET is its impressive printing speed. With a capability of delivering up to 20 pages per minute, this printer ensures that users can quickly produce documents without experiencing significant downtime. Such efficiency is particularly beneficial in busy office environments where time is often of the essence.

In terms of print quality, the Samsung M1713/XET does not disappoint. It utilizes laser technology to produce sharp and clear text, vital for professional documents. The printer boasts a maximum print resolution of 1200 x 1200 dpi, ensuring that even the smallest fonts remain legible and graphics maintain their clarity. This high-quality output makes it suitable for a variety of printing needs, from simple text documents to more complex reports and presentations.

The M1713/XET also emphasizes cost efficiency. It is designed to accommodate a relatively low cost per page, making it an economical choice for businesses that print frequently. The drum and toner cartridges are separate, allowing for less waste and more efficient use of resources. This design decision means users only need to replace the toner when it runs out, while the drum can last much longer, leading to reduced operational costs over time.

Connectivity options are another highlight of the M1713/XET. The printer supports USB 2.0 connectivity, making it easy to connect to a variety of devices such as computers and laptops. This plug-and-play functionality ensures that users can start printing quickly without complicated setups. Additionally, the Samsung M1713/XET is compatible with various operating systems, including Windows and macOS, enhancing its versatility in diverse office environments.

The compact design of the M1713/XET also makes it an appealing option for offices with limited space. Its small footprint allows it to fit easily on desks without cluttering workspaces, allowing for a more organized and efficient working environment.

In conclusion, the Samsung M1713/XET is a reliable mono laser printer that combines speed, quality, and cost-effectiveness in a compact design. With its impressive printing speed, high-resolution output, efficient operation, and user-friendly connectivity, the M1713/XET is an excellent choice for businesses aiming to enhance productivity and streamline their printing tasks.