Cooking Guide

REHEATING

Your microwave oven will reheat food in a fraction of the time that conventional ovens

GB

and hobs normally take.

 

Use the power levels and reheating times in the following chart as a guide. The times in

 

the chart consider liquids with a room temperature of about +18 to +20°C or a chilled

 

food with a temperature of about +5 to +7°C.

 

Arranging and covering

Avoid reheating large items such as joint of meat - they tend to overcook and dry out

before the centre is piping hot. Reheating small pieces will be more successful.

Power levels and stirring

Some foods can be reheated using 800 W power while others should be reheated using 600 W, 450 W or even 300 W.

Check the tables for guidance. In general, it is better to reheat food using a lower power level, if the food is delicate, in large quantities, or if it is likely to heat up very quickly (mince pies, for example).

Stir well or turn food over during reheating for best results. When possible, stir again before serving.

Take particular care when heating liquids and baby foods. To prevent eruptive boiling of liquids and possible scalding , stir before, during and after heating. Keep them in the microwave oven during standing time. We recommend putting a plastic spoon or glass stick into the liquids. Avoid overheating (and therefore spoiling) the food.

It is preferable to underestimate cooking time and add extra heating time, if necessary.

Heating and standing times

When reheating food for the first time, it is helpful to make a note of the time taken - for future reference.

Always make sure that the reheated food is piping hot throughout.

Allow food to stand for a short time after reheating - to let the temperature even out. The recommended standing time after reheating is 2-4 minutes, unless another time is recommended in the chart..

Take particular care when heating liquids and baby food. See also the chapter with the safety precautions.

REHEATING LIQUIDS

Always allow a standing time of at least 20 seconds after the oven has been switched off to allow the temperature to even out. Stir during heating, if necessary, and ALWAYS stir after heating. To prevent eruptive boiling and possible scalding, you should put a spoon or glass stick into the beverages and stir before, during and after heating.

REHEATING BABY FOOD

BABY FOOD: Empty into a deep ceramic plate. Cover with plastic lid. Stir well after reheating! Let stand for 2-3 minutes before serving. Stir again and check the temperature. Recommended serving temperature: between 30-40°C.

BABY MILK: Pour milk into a sterilised glass bottle. Reheat uncovered. Never heat a baby’s bottle with teat on, as the bottle may explode if overheated. Shake well before standing time and again before serving ! Always carefully check the temperature of baby milk or food before giving it to the baby. Recommended serving temperature: ca. 37°C.

REMARK:

Baby food particularly needs to be checked carefully before serving to prevent burns. Use the power levels and times in the next table as a guide lines for reheating.

SAMSUNG ELECTRONICS 29

Page 64 Page 66
Page 65
Image 65
Samsung M1713/XET manual Arranging and covering, Power levels and stirring, Heating and standing times
Page 64 Page 66

M1713/XET specifications

The Samsung M1713/XET is a versatile and compact mono laser printer designed for small to medium-sized offices that require a reliable and efficient printing solution. This printer offers a harmonious blend of speed, quality, and cost-effectiveness, making it an excellent choice for businesses looking to optimize their printing operations.

One of the standout features of the M1713/XET is its impressive printing speed. With a capability of delivering up to 20 pages per minute, this printer ensures that users can quickly produce documents without experiencing significant downtime. Such efficiency is particularly beneficial in busy office environments where time is often of the essence.

In terms of print quality, the Samsung M1713/XET does not disappoint. It utilizes laser technology to produce sharp and clear text, vital for professional documents. The printer boasts a maximum print resolution of 1200 x 1200 dpi, ensuring that even the smallest fonts remain legible and graphics maintain their clarity. This high-quality output makes it suitable for a variety of printing needs, from simple text documents to more complex reports and presentations.

The M1713/XET also emphasizes cost efficiency. It is designed to accommodate a relatively low cost per page, making it an economical choice for businesses that print frequently. The drum and toner cartridges are separate, allowing for less waste and more efficient use of resources. This design decision means users only need to replace the toner when it runs out, while the drum can last much longer, leading to reduced operational costs over time.

Connectivity options are another highlight of the M1713/XET. The printer supports USB 2.0 connectivity, making it easy to connect to a variety of devices such as computers and laptops. This plug-and-play functionality ensures that users can start printing quickly without complicated setups. Additionally, the Samsung M1713/XET is compatible with various operating systems, including Windows and macOS, enhancing its versatility in diverse office environments.

The compact design of the M1713/XET also makes it an appealing option for offices with limited space. Its small footprint allows it to fit easily on desks without cluttering workspaces, allowing for a more organized and efficient working environment.

In conclusion, the Samsung M1713/XET is a reliable mono laser printer that combines speed, quality, and cost-effectiveness in a compact design. With its impressive printing speed, high-resolution output, efficient operation, and user-friendly connectivity, the M1713/XET is an excellent choice for businesses aiming to enhance productivity and streamline their printing tasks.
Top Page Image Contents