Installing Your Microwave oven

 

Setting the Time (M1733N)

Place the oven on a flat, level surface that strong enough to safely bear
Your microwave oven has an inbuilt clock. The time can be displayed
the weight of the oven.
in either the 24-hour or 12-hour notation. You must set the clock:

GB

20 cm

10 cm

above

behind

10 cm of the side

1.When you install your oven, Make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind, on the sides of the oven and 20 cm (8 inches) of above.

2.Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

•When you first install your microwave oven•After a power failure

✉Do not forget to reset the clock when you switch to and from summer and winter time.

1. To display the time

Then press the

in the...

button...

24-hour notation

Once

12-hour notation

Twice

2. Set the hour with the h button and the minutes with the

min button.

☛Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

☛For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable (I-SHENG SP022, KDK KKP4819D, EUROELECTRIC 3410, SAMIL SP- 106B, MOONSUNG EP-48E, HIGH PROJECT H.P 3). Contact your local dealer to have it replaced. The power cable of ISRAEL is PENCON(ZD16A), S/AFRICA APEX LEADS SA16 and NIGERIA, GHANA, KENYA and U.A.E is PENCON(UD13A1).

☛Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

3. When the right time is displayed, press the

button

again to start the clock.

 

Result :

The time is displayed whenever you are not

 

using the microwave oven

 

7