AAConnecting with NFC function - For Android
You can connect the M5 to Bluetooth devices easily by gently touch the smart device to the mark on the top panel of the M5.
Connect your NFC compatible device to enjoy music with high quality stereo sound, all without wires.
Connect
Smart device
1Plug the M5 into an electrical outlet.
2Turn on the NFC function on your Smart device, and then gently touch the device to the
mark on the top panel of the M5.
3The Bluetooth screen appears on your Smart device.
4Select OK.
5Select the desired track to play from your smart device's music list.
6The M5 plays the track you selected.
NOTES |
|
99To disconnect the Bluetooth connection, gently touch the smart device to the | mark on the top |
panel of the M5 again. |
|
99Please be careful not to disturb other buttons around the NFC tag.
99Do not place or play back your NFC device on top of the NFC tag on the M5. Vibrations from the music may cause the device to tip over and cause the M5 to disconnect or damage the device.
99The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.
99The position of the NFC antenna differs on different devices. Check where the NFC antenna is before | |
connecting. | |
99If your device is covered with a thick case, the connection may not succeed. | |
99The | mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in |
other countries.
99If you unplug the M5, the NFC connection is terminated. To
4444
35