AAAdding a HUB

AAAdding a HUB

An M5 and a HUB may not pair successfully if the M5 and HUB are too far apart or are on different floors.

In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the M5 to the closest HUB.

1Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.

2

Plug in the new HUB you are using as an extender,

 

 

and then press its SPK ADD button for 10 seconds.

 

3

The newly added HUB's LED indicators turn off and

 

 

on, and it switches to Repeater mode.

M5

4

Once the connection between the two HUBs has been

 

 

established, the added HUB's (

) indicator stops

Used as a

 

blinking.

 

 

 

extender

NOTES

 

99If your smart device is not connected to the wireless router

 

with a Wi-Fi connection, the M5 will not appear on the

HUB

Samsung Multiroom app.

 

99Place the HUB that is in Repeater mode in an appropriate

 

location between the M5 and the HUB that is connected to the wireless router.

 

99You can set only one HUB to Repeater mode.

 

AARelocating the M5

When relocating your M5, refer to the below table.

 

 

 

Wireless router

If you want to connect your M5 to the

If you want to connect your M5 to a

HUB

current wireless router.

different wireless router.

 

 

Turn off the M5, relocate it, then establish

Without a HUB

 

the new connection as described in the

 

Turn off the M5, relocate it and then turn

installation instructions on pages 18

 

through 30. Press here

 

it on.

 

 

Connect a LAN cable between the HUB

With a HUB

 

and the new wireless router, turn on the

 

 

HUB, and then turn on the M5.

4444

39

Page 39
Image 39
Samsung user manual AA Adding a HUB, AA Relocating the M5