Checking the Remaining Time
Disc Playback | ENG |
DVD
1Press the REMAIN button.
•For checking the remaining time of a title or chapter being played.
Each time the Remain button is pressed , the time is displayed as below:
TITLE REMAIN TIME
CD MP3
1Press the REMAIN button.
If you press the REMAIN button, the remaining time is displayed.
To cancel this function, press the REMAIN button again.
Selecting a CD in the Disc changer
To select a specific disc, press the DISC CHANGE button on the front panel or Disc Skip on the remote control, until the required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
• If the disc selected is not loaded, the next disc is played automatically. | OPERATION | |
Note | • For mixed discs, the play order is as below:MP3/WMA DIVX JPEG. | |
| • Depending on the content of the disc, the initial screen may appear different. |
|
| • Depending on the recording mode, some |
|
| For CD discs, you can press the numeric buttons to select the track, when you |
|
| • press the numeric buttons after 3 seconds, the playback starts automatically. |
|
CHAPTER REMAIN TIME
ELAPSED TIME
• Table of contents of a
• DTS Audio is not supported.
•DVD Audio Disc is not supported.
To stop playback, press STOP button during playback.
• If pressed once, the stop position will be stored in memory. If PLAY ( ) button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PAUSE button during playback.
• To resume playback, press PLAY( ) button again.
15 | 16 |