![](/images/new-backgrounds/1177526/17752617x1.webp)
![](/images/new-backgrounds/1177526/17752617xi2.webp)
![](/images/new-backgrounds/1177526/17752617xi3.webp)
![](/images/new-backgrounds/1177526/17752617xi4.webp)
Connecting
External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
Audio Cable
If the external analog component has only one Audio Out, connect either left or right.
1 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX to select AUX.
•‘AUX’ appears in the display.
![](/images/new-backgrounds/1177526/17752617xi7.webp)
![](/images/new-backgrounds/1177526/17752617xi8.webp)
![](/images/new-backgrounds/1177526/17752617xi9.webp)
Connecting the FM Antennas
FM Antenna (supplied) | CONNECTIONS |
|
FM antenna connection
1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
•If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
Cooling Fan | The cooling fan supplies cool air to the unit to prevent overheating. |
Please observe the following cautions for your safety.
• Make sure the unit is
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
15 | 16 |