Samsung MAX-T35 Recording a Radio Program, Tape Counter, Timer Function, Cancelling the Timer

Recording a Radio Program Tape Counter

Timer Function

GB

You can record a radio program of your choice.

You can only record on cassettes in TAPE2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch the system on by pressing STANDBY/ON.
2	Insert a blank cassette in TAPE2.
3	Select the TUNER function by pressing TUNER.
4	Select the radio station that you wish to record by pressing Tuning
	or	on the remote control or by press the Tuning Down or
	Up on the front panel.
5	Press REC/PAUSE.
	Result: REC is displayed in red and recording starts.

6 To stop recording, press .
3
1
4	6	4
	5

Copying a Cassette (Dubbing)

You can copy a cassette from TAPE1 to TAPE2.

Normal speed dubbing in selecting Tape function mode.

You do not need to adjust the volume, as it has no effect on the recording.

Take care not to insert the tape to be copied in TAPE2, as it will be erased when you start recording.

1	Switch your system on by pressing STANDBY/ON.
2	Insert a blank cassette in TAPE2.
3	Insert the tape to be copied in TAPE1.
4
	To copy a cassette at...	Press...
	Normal speed	DUBBING

Result: The appropriate indications are displayed and the cassette in TAPE1 is copied to the cassette in TAPE2.

5 To stop dubbing, press .

1

5

4

18

When playing a cassette in one of the cassette decks, a counter is displayed to enable you to take note of the counter value at the start of each track to start playback at the beginning of the track to which you wish to listen.

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing COUNTER RESET .

Each cassette Tape has a separate counter.

TIMER ON / OFF	TIMER / CLOCK	PROGRAM / SET
AI SLEEP	SHUFFLE	CD REPEAT
MO / ST	DEMO	DIMMER
REC / PAUSE	TAPE 1/2	COUNTER RESET
	TAPE

The timer enables you to switch the system on or off at specific times.

Example: You wish to wake up to music every morning.

If you no longer want the system to be switched on or off automatically, you must cancel the timer.

Before setting the timer, check that the current time is correct.

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing STANDBY/ON.
2	Press TIMER/CLOCK until	TIMER is displayed.
3	Press ENTER.

Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

4 Set the timer switch-on time.

aSet the hour by tuning the MULTI JOG knob to the right or to the left.

bPress ENTER.

Result: The minutes flash.

cSet the minutes by tuning the MULTI JOG knob to the right or to the left.

dPress ENTER.

Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time.

5 Set the timer switch-off time.

aSet the hour by tuning the MULTI JOG knob to the right or to the left.

bPress ENTER.

Result: The minutes flash.

cSet the minutes by tuning the MULTI JOG knob to the right or to the left.

dPress ENTER.

Result: VOL XX is displayed, where XX corresponds to the volume already set.

6	Press TUNING Down and Up to adjust the volume level and press
	ENTER.
	Result: The source to be selected is displayed.
7	Turn the MULTI JOG knob to select the source to be played when
	the system switches on.
	If you select...			You must also...
	TAPE (cassette)			Insert a recorded cassette in one of
				the decks before setting the
				system to standby.
	TUNER (radio)			a Press ENTER.
				b Select a preset station by tuning
				the Multi Jog knob to the right or
				to the left.
	CD (compact disc)			Load one or more compact discs.
8	Press ENTER to confirm the timer.
9	Press STANDBY/ON to set the system to standby mode.
	Result:		is displayed to the top of the time, indicating that the timer
		has	been set. The system will switch on and off automatically
		at the required times.

GB

If the timer switch on and off times are identical, the word ERROR is displayed.

1,9
4,5,6,7	4,5,6,7
2	3,4,5,6,7,8

To set the timer function

You may use / buttons on the front panel to adjust in step 4, 5, 6, 7.

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.

You can stop the timer at any time (system on or in standby mode).

To...		Press Timer-On/Off...
Cancel the timer		Once.
		Result:		is no longer displayed.
Restart the timer		Twice.
		Result:		is displayed again.
POWER			DISC
	OPEN/CLOSE		SKIP
TIMER ON / OFF	TIMER / CLOCK		PROGRAM / SET
AL SLEEP	SHUFFLE		CD REPEAT
MO / ST	DEMO		DIMMER
REC / PAUSE	TAPE 1/2	COUNTER RESET

19