Samsung MAX-T35 Selecting a Stored Station, Improving Radio Reception, Listening to a Cassette

GB

Selecting a Stored Station

You can listen to a stored radio station as follows:

1	Switch the system on by pressing STANDBY/ON.
2	Select the TUNER function by pressing TUNER on remote control.
3	Select the required frequency band by pressing TUNER (BAND) on
	the remote control or TUNER (BAND) again on the front panel.
4	Press the TUNING MODE button on the front panel of the unit, or the
	TUNING MODE button on the remote control until “PRESET” is
	displayed.
5	Turning MULTI JOG on the front panel left or right until the desired
	station is found or press	/	to select the desired station.
	or

Select the desired station by pressing the

TUNING or button on the remote control.

Result: The desired station is now received.

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

Testing the positions of the FM and AM(MW) aerials before fixing them permanently

If reception from a specific FM radio station is poor, press MO/ST. to switch from stereo mode to mono. The quality of the sound will be improved.

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 23.

1	Switch the system on by pressing the STANDBY/ON button.
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open either cassette TAPE1 or 2 by pushing and releasing the Tape
4	cover where PUSH EJECT (	) is written.
	Insert the pre-recorded cassette with the open edge of the tape
	facing downward.
5	Close the Tape by pushing on it until it clicks into place.
	Result: Depending on the Tape selected, the 1 or 2 indication is
	displayed in front of the counter number.
6	If you have inserted two cassettes, press TAPE1/2 on the front panel
	or directly the TAPE1/2 button on the remote control to select the
	cassette to be played.

CD Synchro Record Feature

GB

You can record a compact disc on a cassette in two different ways:

Synchro nised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing STANDBY/ON.
2	Insert a blank cassette in TAPE2.
3	Select the CD function by pressing MP3-CD/CDon the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD SYNCHRO or press CD
	SYNCHRO directly to start recording at the beginning of the disc.

Result: REC and SYNC are displayed and recording starts.

7 To stop recording, press .

1	2,3
5	4				5
		OPEN/CLOSE		SKIP
	1TIMER ON / OFF	TIMER / CLOCK		PROGRAM / SET
	AI SLEEP	SHUFFLE		CD REPEAT
	MO / ST	DEMO		DIMMER
	REC / PAUSE	TAPE 1/2		COUNTER RESET
		TAPE
		MP3-CD / CD		5
		MUTE
	VOLUME		TUNING
			/ALBUM
	SURROUND MODE	SOUND MODE	TUNING MODE		4
				+10

16

	Result: Depending on the Tape selected, the TAPE 1 or TAPE 2
		indication is displayed.
7
		To listen to...	Press ...
	Side A,B		TAPE (	)

Result: The cassette starts playing.

When the cassette is stopped, select one of the following functions as required or on the remote control.

8Main Unit

To...	Press...
Rewind the cassette
Fast-forward the cassette

Remote Control

	To...	Press ...
	Rewind the cassette
	Fast-forward the cassette
9
	To...	Press ...
	Stop the playback

1
	2,7
8	8
	9
	6

3

1

7

6

Recording a Compact Disc

The direct recording mode enables you to start recording with any track on the compact disc.

You can only record on cassettes in Deck 2.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing STANDBY/ON.
2	Insert a blank cassette in TAPE2.
3	Select the CD function by pressing MP3-CD/CDon the front panel.
4	Load the compact disc.
5	Select the required disc.
6	Select the required track on the compact disc and press			on the front
	panel or	on the remote control to set the compact disc player to Pause
	mode.
7	Press the REC/PAUSE.
	Result: REC is displayed.
8	Press the		to start playing the track.
	Result: The track is recorded on the cassette.
9	To stop recording, press .

3,6,8

1

9

7

17