DEMO/DIMMER function | Setting the Clock |
Listening to a Compact Disc
All functions available on the system can be viewed on the
GB display and the display's brightness can be switched between "on" and "off".
1 | Press the DEMO/DIMMER button. |
| Result: All functions available on the system appear on the front |
| panel display. |
| Each of these are explained in detail in this guide. Please refer to |
| the relevant section. |
2 | Press the DEMO/DIMMER button again. |
| Result: The Dimmer function is selected and the display darkens. |
3 | Press the DEMO/DIMMER button once again to brighten the front |
| panel display. |
A display brightness control can only be performed while the system power is on.
Your system is equipped with a clock which allows you to turn your system on and off automatically.
You should set the clock:
When you first purchase the
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1 | Switch the system on by pressing STANDBY/ON. | ||
2 | Press TIMER/CLOCK twice. |
| |
| Result: CLOCK is displayed. |
| |
3 | Press ENTER. |
| |
| Result: The hour flashes. |
| |
4 |
|
| |
To... | Turn the MULTI JOG knob to the... | ||
Increase the hours | Right | ||
| |||
| Decrease the hours | Left | |
5 | When the correct hour is displayed, press ENTER. | ||
| Result: The minutes flash. |
| |
6 |
|
| |
To... | Turn the MULTI JOG knob to the... | ||
| Increase the minutes | Right | |
| Decrease the minutes | Left | |
7 | When the correct time is displayed, press ENTER. | ||
| Result: The clock starts and is displayed, even when the system is in |
standby mode.
You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.
You can also use / buttons on the panel front or
TUNING / on the remote control to instead of MULTI
JOG knob in step 4, 6.
To play... | Press... |
|
|
|
Disc 1 |
|
| ) or Disc 1 | |
|
| |||
Disc 2 | Disc 2 |
|
|
|
Disc 3 | Disc 3 |
|
|
|
Result: The compartment closes automatically and the disc selected starts playing.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using it, to prevent dust from entering.
GB
This unit has been designed to playback the CDs: Audio CD, CD Text,
When you have loaded at least one compact disc into the player, you can start listening to it.
Continued use of irregular shape CDs
1 | Switch the system on by pressing Standby/on. |
|
|
|
|
|
| ||||
2 | Select the CD function by pressing |
|
|
|
| ) . | |||||
|
| ||||||||||
|
| ||||||||||
3 | Load one or more discs. |
|
|
|
|
|
|
|
|
|
|
4 | Press |
|
|
| ) on the front panel or |
|
|
|
|
| on the remote |
|
|
|
|
|
| ||||||
| control. |
|
|
|
|
|
|
|
|
|
|
If you have loaded more than one compact disc, they will be played in turn.
Adjust the volume as required by:
5 Turning the VOLUME knob on the front panel or
Pressing the VOLUME + or - buttons on the remote control
6 To pause temporarily during playback, press | ). |
Press
7 Press | when you want to stop playback. |
When playing a disc, you can load new discs without stopping the current one. To do so, open the compartment by pressing Disc Change and load new discs in the other two vacant slots (not the one containing the disc that you are play- ing). You cannot rotate the carrousel during playback.
When no discs are loaded, the “NO DISC” indication is dis- played.
The CD player stops automatically after playing the three discs, if the CD REPEAT function has not been selected.
1 |
|
|
4,6 | 4,6 | 4,6 |
| 2 | 3,5,7 |
|
|
8
You can load or unload compact discs when the radio, tape or auxiliary source function is selected.
5 | 4 | 2,5 |
1 |
|
|
5 |
|
|
1 |
2,4,6 |
5 |
7 |
When playing a
You can play back your original
Before playing back
Some
9