Connecting the AM (MW) Aerial

The AM aerial (for long and medium waves) can be:

Placed on a stable surface

Fixed to the wall (you must first remove the base)

The AM aerial connector terminals are located on the rear of the system and are marked AM .

To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires.

Always keep them at least 2 inches (5 cm) away.

GB

AUX IN

FRONT

SPEAKERS (6‰)

Connecting the FM Aerial

How to connect a COAXIAL TYPE aerial.

Connect a 75antenna to the FM antenna terminal.

Plug the connector on the FM aerial supplied into the coaxial socket (75) marked FM on the rear of the system.

Follow the instructions given on Page 24 to tune into a radio station, and determine the best position for the aerial.

If reception is poor, you may need to install an outdoor aerial.

To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75coaxial cable (not supplied).

11

Page 11
Image 11
Samsung MAXDN87RH/ELS Connecting the AM MW Aerial, Connecting the FM Aerial, AM aerial for long and medium waves can be