Connecting your System to the Power Supply

Inserting Remote Control Batteries

Purchase the mini-compact system

Find that the remote control is no longer operating correctly

When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.

1	Place your thumb on the position marked	on the battery
	compartment cover (rear of the remote control) and push the cover in
	the direction of the arrow.
2	Insert two AAA, LR03 or equivalent batteries, taking care to respect
	the polarities:
	+ on the battery against + in the battery compartment
	– on the battery against – in the battery compartment
3	Replace the cover by sliding it back until it clicks into position.

If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.

Before plugging your system into a main socket, you must check the voltage.

1				Plug the main lead (marked AC Cord on the rear of the system) into
				an appropriate socket.
2				Press the Standby/On button to switch your mini-compact system on.

The loudspeaker connector terminals are located on the rear of the system.

1	Press and hold the clamp of the speaker terminal on the rear of the
	unit.
2	Insert the end of the speaker cord into the terminal.
	Match the polarity (colors): Red (+) to red (+) and black (–) to black
	(–).
	Match the polarity (colors): Blue (+) to Blue (+) and black (–) to black
	(–).
3	Release the finger from the clamp.