OPERATION
Turning on the Power and Selecting a Display Language
The first time you plug the power cord into an out- let, or after there has been an interruption in power, the display shows “SAMSUNG SO SIMPLE.” At this point, you can select a language and weight system for the display. You can choose from English, French, Spanish and Portuguese and between pounds (LBS) or kilograms (KG). To do so,
1 Press START immediately after plugging in your Microwave. The display shows “ENGLISH/LBS”. If the display does not show “ENGLISH/LBS”, you will need to unplug the Microwave and then plug it in again to change the language.
Setting the Clock
1 Press the Clock button.
The display will show:
2 Use the number buttons to enter the cur-
rent time. You must press at least three
numbers to set the clock. If the current
time is 5:00 am, enter 5,0,0.
HELP
2 Press START repeatedly to select the lan- guage and weight system you wish to use:
•ENGLISH/LBS,
•ENGLISH/KG,
•FRENCH/KG,
•SPANISH/LBS, or SPANISH/KG
•PORTUGUESE/KG.
If you continue to press START, the set- tings will cycle in the order shown here.
MICRO | HELP |
MICRO | HELP |
MICRO | HELP |
| |
MICRO | HELP |
| |
MICRO | HELP |
|
When you have selected the language and weight system you want to use, press the PAUSE/CANCEL button to end this procedure, or press CLOCK to set the clock.
HELP
3 Press Clock again. A colon will appear,
indicating that the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by pressing the Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear instructions you have entered. It also allows you to pause the oven’s cooking cycle, so that you can check the food.
•Pause the oven during cooking: press Pause/Cancel once.
To restart, press Start.
•Stop cooking, erase instructions, and return the oven display to the time of day: press Pause/Cancel twice.
•Correct a mistake you have just entered: press Pause/Cancel once, then
•Cancel a timer setting: press Pause/Cancel once.
8OPERATION
