Important
•After installing the oven and plugging into an electrical outlet, do not unplug the power cord. The gas sensor needs time to stabilize in order to cook satisfactorily.
•It is not advisable to use the auto sensor cooking feature on a continuous cooking operation, i.e. one cooking operation immediately after another.
•Install the oven in a well ventilated location for proper cooling and airflow and to ensure the sensor will operate accurately.
•To avoid poor results, do not use the Auto sensor when the room ambient temperature is too high or too low.
•Do not use volatile detergent to clean your oven. Gas resulting from this detergent may affect the sensor.
•Avoid placing the oven near high moisture or gas emitting appliances, since this will interfere with the proper performance of the Auto Sensor.
•Always keep the inside of the oven clean. Wipe all spills with a damp cloth. This oven is designed for household use only.
USING THE AUTO REHEAT/COOK FEATURES
The 5 Auto Reheat/Cook features include/provide
You can adjust the size of the serving by turning the Multi Function Selector Dial. 
Use only recipients that are
Open the door. Place the food in the centre of the turntable. Close the door.
1. Press the Auto Reheat/Cook button.
2. Turn the Multi Function Selector Dial to select Cook category. (Auto Reheat or Auto Cook)
3. Select the Auto Reheat by pressing the Multi Function
Selector Dial.
4.Select the type of food that you are cooking by turning
the Multi Function Selector Dial. Refer to the table on the following page for a description of the various
5. Select the size of the serving by turning the Multi Function Selector Dial.
6.Press the START/+30s button.
Result: The food is cooked according to the pre-
programmed setting selected.
• When cooking has finished, the oven will beep and flash “End” 4 times. The oven will then beep one time per minute.
English - 18
��
1:21:40
