Auto Program

MENU m Channel Auto Program ENTER E

Channel

Antenna

Cable

Auto Program

Clear Scrambled Channel

Fine Tune

Crosstalk Noise Reduction

On

-- The displayed image may differ depending on the model.

-- Available in TV mode only.

The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List.

To start Auto Program, follow these steps:

1

Push MENU m Channel Auto Program ENTER E on your remote. The Auto Program screen appears.

2

On the Auto Program screen, select the source of your product signal.

 

――Air: If your product is connected to an antenna choose Air, and then press ENTER E. The product will automatically

 

start memorizing channels.

 

 

――Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.

3

On the cable type screen, use the

buttons to select the type of digital and analog cable systems you have:

 

STD, HRC, or IRC. Most systems are STD (Standard). When done, select Next, and then press ENTER E. The product will

 

start memorizing channels.

 

――Channel memorization can take up to 45 minutes, depending on your cable system.

――Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel buttons on your remote.

Cancelling Auto Program

1

Press the E button.

2

A Stop Auto Program? message appears.

3

Press the E button.

113

Page 113
Image 113
Samsung MD55C 113, Cancelling Auto Program, Antenna, Clear Scrambled Channel Fine Tune Crosstalk Noise Reduction