Samsung MD55C, MD32C user manual Optimum Picture Quality and Afterimage Burn-in Prevention, 261

Optimum Picture Quality and Afterimage Burn-in Prevention

Optimum Picture Quality

•• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.

-- Resolution: 1920 x 1080

-- Vertical frequency (refresh rate): 56 ~ 75 Hz

•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance.

-- The number of sub-pixels by panel type: 6,220,800

•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.

•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. -- Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.

•• Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one resolution to obtain the optimum picture quality. Therefore, setting a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your monitor.

261