Samsung MD32C, MD55C user manual 148, Sound Feedback, Auto Power, Standby Control, Lamp Schedule

General

Sound Feedback	Off
Auto Power	Off
Standby Control	Auto
Lamp Schedule	Off
OSD Display
Power On Adjustment	0 sec
Temperature Control	77

-- The displayed image may differ depending on the model.

Sound Feedback

Your product gives sound feedback when you use product.

Sound Feedback is enabled by default. Turn off Sound Feedback or adjust its volume.

This function is enabled by default. The volume can be adjusted or muted.

――Off / Low / Medium / High

Auto Power

Enabling this option will automatically power on the product if the power cable is connected.

•• Off / On

Standby Control

You can set the screen standby mode to be applied when an input signal is received.

•• Auto

Power-saving mode will activate if no input signals are detected even though a source device is connected to the display. The message No Signal will appear if no source device is connected.

――Available in PC / DVI mode.

•• On

Power-saving mode will activate if no input signals are detected.

•• Off

The message No Signal will appear if no input signals are detected.

――The Standby Control option is only enabled when Source is set to PC, DVI.

――If No Signal is displayed although a source device is connected, check the cable connection.

Lamp Schedule

Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.

•• Off / On

148