Samsung ME73A/XEE Installing Your Microwave Oven, Remove all packing materials inside the oven

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

INSTALLING YOUR MICROWAVE OVEN

Place the oven on a flat level surface 85 cm above the floor. The surface should be strong enough to safety bear the weight of the oven.

The temperature of accessible surfaces may be high when the appliance is operating.

The door or the outer surface may get hot when the appliance is operating.

Keep the appliance and its cord out of reach of children less than 8 years.

1.When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind

and, on the sides of the oven and 20 cm (8 inches) of space above.

20 cm	10 cm
above	behind
85 cm of	10 cm on
the floor	the side

Appliances are not intended to be operated by means of an external timer or separate remote-control system.

This product is a Group 2 Class B ISM equipment. The definition of group 2 which contains all ISM equipment in which radio- frequency energy is intentionally generated and/ or used in the form of electromagnetic radiation for the treatment of material, and EDM and arc welding equipment.

For Class B equipment is equipment suitable for use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes.

2.Remove all packing materials inside the oven.

3.Install the roller ring and turntable. Check that the turntable rotates freely.

(Turntable type model only)

4.This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

For your personal safety, plug the cable into a proper AC earthed socket.

English - 6

ME73A-XEE_DE68-03794P-00_EN.indd 6

12/17/2014 10:40:55 AM