Setting the time
Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the
You must set the clock:
•When you first install your microwave oven
•After a power failure
Do not forget to reset the clock when you switch to and from summer and winter time.
1. To display the time in the...
Press the Clock button once or twice.
2. Turn the Time/Weight dial to set hour.
3. Press the Clock button.
4. Turn the Time/Weight dial to set minute.
5. Press the Clock button.
Auto energy saving function
If you do not select any function when appliance is in the middle of setting or operating with temporary stop condition, function is canceled and clock will be displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
Cooking/Reheating
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended. First, place the food in the centre of the turntable. Then, close the door.
1. Set the power level to maximum by turning Cooking Power Control knob.
(MAXIMUM POWER : 800 W)
2.Set the time by turning Time/Weight dial.
Result: The oven light comes on and the turntable starts
rotating.
1) Cooking starts and when it has finished the oven beeps 4 times.
2)The end reminder signal will beep 3 times (once every minute).
3)The current time is displayed again.
Never switch the microwave oven on when it is empty.
You can change the power level during cooking by turning the Cooking Power Control knob.
04 OV UEN SE
English - 15
|
| ||
|
| ||
|
|
|
|