Samsung MM-B3, MMB3LH/ELS, MMB3LH/OMX manual CD Repeat Function, Repeat a B Function

Setting the Clock

B

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro-component system

After a power failure After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

7 If it is desired to pause while the playback is processing, press the CD( ) button.

Press the CD( ) button once again to play back again.

8 To stop playback, press the Stop ( ) button.

CD Repeat Function

You can repeat:

A specific track on a compact disc

All tracks on the compact disc

1 Press the CD Repeat button.
To repeat the...	Press CD Repeat...

Programming the Order of Playback

GB

You can decide for yourself:

The order in which you listen to the tracks

The tracks to which you do not wish to listen

This feature can be combined with the CD Repeat function.

1 If necessary, stop the player by pressing Stop ( ).

1	Switch the system on by pressing On/Standby (	) .
2	Press Timer/Clock twice.
	Result: CLOCK is displayed.
3	Press Program/Set.
	Result: The hour flashes.
4	To...	Press...
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press Program/Set.
	Result: The minutes flash.
6

TUNER CD TAPE

AUX

Band

Down Tuning Mode1, 5,Up 7

REC/Pause CD Sync.

8

Volume	6
6
EQ	S.Bass

Power

Sound

Counter

Mute Reset

Repeat

AB

Current track indefinitely	Once (REP. 1 is displayed)
Disc	Twice (REP. ALL is displayed)
2 When you wish to stop the Repeat function, press CD Repeat a third time.
Result:REP is no longer displayed and the function is cancelled.
Sleep	CD Repeat Mono/ST. TUNER
	Band
	TAPE

2	Press Program/Set.
	PROGRAM
	Result:P -- 01 ----is displayed.
3	Select the required track by pressing the SKIP buttons:
	to move backwards through the tracks
	to move forwards through the tracks
4	Press Program/Set.
	PROGRAM
5	Result:P -- 02 ----is displayed.
	To select other tracks, repeat Steps 3 and 4.
6	You can programme up to 24 tracks.
	When you have finished selecting the tracks, press CD (	) to start
	listening to the selection, in the order in which the tracks were
	programmed.

To...	Press...
Increase the minutes
Decrease the minutes
7 When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in

standby mode.

You can display the time, even when you are using another function, by pressing Timer/Clock once.

On/Standby	Timer	Timer/
	On/Off	Clock	VOL.

	1	Program	2		Tuning
	Power
EQ Preset	Sound	/Set	AUX	CD	Mode	CD
Sleep	CD Repeat		4,6			4,6
		3,5,7			VOL.
		Mono/ST.	TUNER
			Band

Selecting a Track

You can select the track you wish to listen to, either when the compact disc player is stopped or when a disc is playing.

To start playback at the beginning of the... Press...

Next track once

Current track	once
Previous track	twice

Track of your choice or the appropriate number of times.

	VOL.
	Tuning
CD	Mode	CD
	VOL.

CD

Repeat A B Function

When you select CD(TAPE) Repeat A B playback, the music

passages to which you were listening are repeated 3 times.

1	Press CD(		) or TAPE button.
	Result:The CD(TAPE) player starts playing.
2	Press Repeat A			B button.
	Result:The indications appear: START
	The flashes appear: A				B
		A Time is memorized.
3	Press Repeat A			B button.

7 Press Stop ( ) twice to cancel the selection when the disc is playing.
Power	Program
EQ Preset Sound	/Set	AUX

2,4

Sleep	CD Repeat Mono/ST. TUNER
	Band
	TAPE
	CD
1,7	6
	VOL.
	Tuning

Listening to a Compact Disc

Do not use CDs of irregular shapes like heart or octagon shapes. The performance of the player may be degraded.

1 Press the CD( )button on the main unit and select CD.

Searching for a Specific Music Passage on a CD

When listening to a compact disc, you can quickly search for a specific music passage on a track.

To search through the tracks... Press and hold down...

Result:The indications appear: END
B Time is memorized.
Your selected passages are repeated 3 times.
4 When you have finished the Repeat playback,
Press Repeat A	B.

3 CD Mode CD 3

VOL.

2 Open the CD door by pushing on the top of the main unit marked Push Open ( ).

Result: The CD door is opened.

3 Place the CD on the compartment so that the CD label faces upward.

4 Close the CD door.

Result: Number of tracks and the total playback time are shown on the display.

5 Press the CD( ) button for playback.

6 Adjust the volume according to needs with the following procedures. Press the VOL. + or – button.

Forwards	for at least one second
Backwards	for at least one second

It is recommended that you turn the volume down before using this function.

	VOL.
	Tuning
CD	Mode	CD
	VOL.

						EQ	S.Bass
TUNER	CD	TAPE		AUX
Band
						Power
			1			Sound
Down	Tuning Mode	Up					Counter
	1
			REC/Pause	CD Sync.	Mute		Reset
					Repeat
					A	B
					2,3,4

Regarding the playback of CD-R/RW

In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewritable) and editing by the user, playback is processed on the respective completed status. (The player may not be played back according to the characteristics of the CD or recorded status.)

The CD-RW is comparably less reflexive than CD which causes more time delay to read.

10 11