Samsung MMB3LH/OMX, MM-B3, MMB3LH/ELS manual Listening to a Cassette, Tape Counter, Mute Function

Result: MUTE

Listening to a Cassette

B

1	Switch the system on by pressing On/Standby (		) .
2	Select the TAPE function by pressing TAPE on the front panel.
3	Open the cassette deck by pushing on the corner of the cover marked
4	Push Eject until you hear a click and then releasing it.
	Insert the pre-recorded cassette with the open edge of the tape facing
	downwards.
5	Close the deck by pushing on it until it clicks into place.
6	Press the TAPE button.
	Result: The cassette starts playing.
7	Press any of the following buttons during playback, as required.
	To...	Press...
	Listen to the same track again	once
	Listen to the next track	once
	Listen to the previous track	twice
	Listen to the track of your choice	or	the appropriate
		number of times
	Listen to the other side of the cassette	/	once (option)

Selecting the Cassette

Playback Mode (OPTION)

Your micro-component system has three cassette playback

modes which enable you to listen to both sides of a cassette automatically.

Press REV.Mode until the appropriate symbol is displayed.

When the display indicates... The micro-component system plays back...

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

Band
					Power
					Sound
Down	Tuning Mode	Up				Counter
		REC/Pause	CD Sync.	Mute
						Reset
				Repeat		REV. Mode
				A	B

Recording a Compact Disc

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

Synchronised recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch the system on by pressing On/Standby (				) .
2	Insert a blank cassette in Deck.
3	Load a compact disc.
4	Press the CD(	) button.
5	Use the CD selection (		,	) buttons to select the desired song.
	Press the CD Sync. button on the front panel.
	When stopped, press the button to start the recording from the
	first piece of music.
6	To stop recording, press Stop (			) button.

Recording a Radio Program

GB

You can record a radio program of your choice.

You do not need to adjust the volume, as it has no effect on

the recording.

1 Switch the system on by pressing On/Standby ( ) . 2 Insert a blank cassette in Deck.

3 Select the TUNER function by pressing TUNER/Band.

4 Select the radio station that you wish to record by pressing

or button .

5 Press REC/Pause.

Result: REC is displayed and recording starts.

6 To stop recording, press Stop ( ) button.

If there are very quiet passages on a track, the automatic search

function may stop before the end of the track. Also, a very short

silence between two tracks may not be detected.

1

1

8 When the cassette is stopped, select one of the following functions as
required.
To...	Press...

TUNER CD TAPE

Volume
EQ	S.Bass

TUNER	CD	TAPE
		AUX

Volume

EQ S.Bass

Rewind the cassette

Band 4

AUX

3 Band

Fast-forward the cassette

The cassette player stops automatically when the beginning or end of the cassette is reached.

9 To stop the playback or search, press Stop ( ) button.

Down Tuning Mode Up

4	REC/Pause CD Sync.
	4	5
6

Power
Sound
Mute	Counter
	Reset
Repeat
A B

Down	Tuning Mode	Up
		REC/Pause CD Sync.
4	6	5
		4

Power

Sound

Counter

Mute Reset

Repeat

AB

Tape Counter

When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen.

The counter is only displayed when a cassette is being played.

Direct recording

The direct recording mode enables you to start recording

Mute Function

1

TUNER CD TAPE

AUX

Band

Down Tuning Mode Up 2,6

REC/Pause CD Sync.

7,8 9 7,8

Volume

EQ S.Bass

Power

Sound

Counter

Mute Reset

Repeat

AB

3,5

Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing Counter Reset.

					EQ	S.Bass
TUNER	CD	TAPE	AUX
Band
					Power
					Sound
Down	Tuning Mode	Up				Counter
		REC/Pause	CD Sync.	Mute
						Reset
				Repeat
				A	B

with any track on the compact disc.

You do not need to adjust the volume, as it has no effect on the recording.

1	Switch your system on by pressing On/Standby (				) .
2	Insert a blank cassette in Deck.
3	Load a compact disc.
4	Press the CD(	) button.
	Use the CD selection (		,	) buttons to select the desired song.
5	Press the REC/Pause button.
	Result: Recording will begin.
6	To stop recording, press Stop (			) button.

You can turn the sound off temporarily on your system.

Example: You wish to answer a telephone call.

1 Press the Mute button.

is displayed and the sound is switched off.

2 To switch the sound back on at the same volume as before, press Mute again.

		EQ	S.Bass
TUNER	CD	TAPE
		AUX
Band

Push Eject

Band

TAPE9

7,8	7,8
	CD

	1
				Volume
					EQ
TUNER	CD	TAPE	AUX
Band		4
					Power
					Sound
Down	Tuning Mode	Up
		REC/Pause	CD Sync.	Mute
		6	5	Repeat
				A	B

S.Bass

Counter

Reset

			Power
			Sound
Down	Tuning Mode	Up		Counter
		REC/Pause CD Sync.	Mute
				Reset
			Repeat
			A B

14 15