Connecting to External Components
Connecting the FM, AM Antennas | GB |
|
Connecting to an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
Audio Cable
If the external analog
component has only one
Audio Out, connect either left
or right.
FM Antenna (supplied)
If AM reception is poor, connect an outdoor AM antenna(not supplied).
CONNECTIONS
AM Loop Antenna (supplied)
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
1 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX to select AUX.
•‘AUX’ appears in the display.
FM antenna connection
1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
AM antenna connection
1.Connect the AM loop antenna supplied
to the AM and terminals.
2.If reception is poor, connect an outdoor single
13 | 14 |