Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
Presetting Stations
You can store up to:
15 | FM stations | • FM | Frequency Modulation |
15 | AM stations | • AM | Medium Wave |
GB
Remote Control Unit
Example: Presetting FM 89.1 in the memory
1 Press TUNER/
BAND button.
•The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
2 Tune in to the desired station.
Automatic Tuning 1 | Press |
|
|
| button to |
|
| ||||
| select the preset station. | ||||
| |||||
| Press and hold TUNING | ||||
Automatic Tuning 2 | |||||
| button to automatically | ||||
| |||||
search the band.
Manual Tuning Briefly press TUNING
button to increase or decrease the frequency incrementally.
1Press the TUNER/ BAND button and select the FM band.
•Each time the button is pressed, the band switches between "FM ➝ AM".
kHz 
MHz
Press TUNING to | Press the TUNER |
2 select "89.10". | 3 MEMORY button. |
• Refer to Step 2 on page 49 to | • “PROGRAM” flashes in the |
automatically or manually tune in | display. |
to a station. |
|
| PROGRAM |
kHz | kHz |
MHz | MHz |
Main Unit
Press the TUNER
1button to select the desired band (FM, AM).
2 Select a broadcast station.
Automatic Tuning | Press the STOP ( |
| ) | ||||||||
| |||||||||||
| |||||||||||
| button to select PRESET | ||||||||||
| |||||||||||
| and then press and hold | ||||||||||
|
|
|
|
| button to select | ||||||
|
|
|
|
| |||||||
| the preset station. | ||||||||||
| Press STOP ( |
|
| ) to select | |||||||
Manual Tuning | |||||||||||
|
| ||||||||||
|
| ||||||||||
| MANUAL and then briefly | ||||||||||
| |||||||||||
| press |
|
|
|
| to tune in | |||||
|
|
| |||||||||
| to a lower or higher | ||||||||||
| frequency. |
|
|
|
| ||||||
Press 
to
4 select preset number.
•You can select between 1 and 15.
PROGRAM 
kHz MHz
5 | Press the TUNER | 6 |
| To preset another |
MEMORY button |
| station, repeat | ||
again. |
| steps 2 to 5. | ||
|
|
|
|
|
•Press the MEMORY button before
‘PROGRAM’ disappears from the display.
•‘PROGRAM’ disappears from the display and the station is stored in memory.
kHz 
MHz
RADIO OPERATION
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
49 | • | Each time the button is pressed, the sound switches between "STEREO" and "MONO". | |
• | In a poor reception area, select MONO for a clear, | ||
|
To tune in to a preset station, press 
on the remote control to select a channel.
50
