Muratec MFX-1500 manual Setting of enlargement or reduction for copying, Selecting a preset rate

3.	Press PAPER SIZE ? repeatedly until the following display appears:
		Copy Ready Num: 1
		Tray → Enter
4.
	Press ENTER.
5.	Then, if necessary, press PAPER SIZE ? again to select a same size of
	recording paper you placed document on the ADF or FBS. You can select
	either letter-, legal- or half-letter-sized paper.
			Copy Ready		Num:	1
				T:Ltr	100%
				T:Legl		100%

T:HLtr 100%

T:OHP 100%

Note: When you set the transparency film, please select “ OHP” mode. You can use letter-sized transparency film.

6. If necessary, select desired resolution, contrast, reduction/enlargement rate. (See “Setting of enlargement or reduction for copying,” right column.)

7. Press START to begin the copying process.

Setting of enlargement or reduction for copying

Your fax machine is capable of enlargement and reduction when copying. Note: The copy enlargement and reduction rate setting is available only for

copying, not for faxing.

Important: Copy enlargement is available only for copying using the FBS; it is not available for copying using the ADF.

To change the reduction or enlargement rate for copying, either select a preset rate or directly enter a rate.

Selecting a preset rate

Either . . .

•Press ENLARGE to select one of the following fixed enlargement rates.

100% 129% 200%

129%: Hhalf-letter → Letter

. . . or . . .

•Press REDUCE to select one of the following fixed reduction rates.

100% 78% 64% 50%

78%: Legal → Letter

64%: Ledger (11″ × 17 ″)→ Letter

Directly entering a rate

Using the numeric keypad, directly enter the reduction or enlargement rate by doing one of the following.

Either . . .

1. Press #.

2. Enter your desired rate using the numeric keypad. You can set any rate from 50% reduction through 200% enlargement.

3. Press # again.

. . . or . . .

Press or to adjust the rate, at 1% intervals, from/including 50% reduction through 200% enlargement.

1.34