Muratec MFX-1500 manual Printouts have irregularities, ∙ The charger may be dirty

Just in case . . .

Printouts have irregularities

∙The paper you’re using may have absorbed moisture, perhaps due either to high humidity or water having been spilled on the paper supply at some point. Toner will not adhere well to paper at the location where the paper has been wet.

Replace the paper with dry paper and re-try the printing.

Printouts have white and/or black lines

∙The toner cartridge or drum cartridge may be defective. Remove and check the cartridge for damage.

If the problem persists, replace either or both of the cartridges as indicated.

∙The charger may be dirty.

Your machine normally cleans the charger automatically. If other solutions fail, please contact your authorized Muratec dealer or call Muratec Customer Support.

Printouts have toner smudges

∙The toner may be unevenly distributed inside the toner cartridge.

Remove the toner cartridge and shake it a few times to redistribute the toner inside. If the problem persists, replace the cartridge.

∙The toner cartridge or drum cartridge may be defective. Remove and check the cartridges for damage. If the problem persists, replace either or both of the cartridges as indicated.

∙If you find smudges on the back of the printouts, the transport roller may be dirty.

Your machine normally cleans the transport roller automatically. If other solutions fail, please contact your authorized Muratec dealer or call the Muratec Customer Support Center at [972]364-3350.

Printouts have white spots

∙The charger may be dirty.

Your machine normally cleans the charger automatically. If other solutions fail, please contact your authorized Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.

3.6