Muratec MFX-1500 manual Code database polling, Press COPY/FAX to change to Fax mode, if necessary

Beyond the bas cs

13. Press COMMUNICATION OPTIONS, ENTER.

The display will show:

Delayed

Enter Time: 15/17:05

14. Use the numeric keypad to enter the day and time when the transmission should begin, then press ENTER.

Note: If you make a mistake or you want to change just one character in

the number, press to move the cursor leftward, or to move it rightward, to that character. Then re-enter until the number is just as you want it.

15. Press START.

If, in step 12, you chose an immediate transmission, your fax machine will begin dialing. If you chose a delayed command, the machine will display “Reserved” on the top line of the display, indicating that the machine has stored the command in memory and will perform it later.

F-Code database polling

1. Press COPY/FAX to change to Fax mode, if necessary.

2. Press COMMUNICATION OPTIONS eight times.

8.F-Code Polling

Comm.Option/Enter

3. Press ENTER.

Enter Sub-Address

_

4. Use the numeric keypad to enter the appropriate subaddress number. In this example, we’ve entered 123456.

Enter Sub-Address 123456_

5. Press ENTER. The display will show:

Enter Password

_

6. Use the numeric keypad to enter the appropriate password number. In this example, we’ve entered 654321.

Enter password 654321_

Note: If you know that this sub-address does not have a password, skip to step 8.

7. Press ENTER. The display will show:

Enter Fax Number

_

8. Enter the fax number either by pressing a one-touch key, entering a speed- dial number or dialing from the numeric keypad. Do not press START.

9. What you do now depends upon when you wish the transmission to begin. ∙ To have it begin now, skip to step 12.

∙ To delay it, proceed to step 10.

10. Press COMMUNICATION OPTIONS, ENTER.

The display will show:

Delayed

Enter Time: 15/17:05

11. Use the numeric keypad to enter the day and time when the transmission should begin, then press ENTER.

Note: If you make a mistake or want to change just one character in the

number, press to move the cursor leftward, or to move it rightward, to that character. Then re-enter until the number is just as you want it.

12. Press START.

If, in step 9, you chose an immediate transmission, your fax machine will begin dialing. If you chose a delayed command, the machine will display “Reserved” on the top line of the display, indicating that the machine has stored the command in memory and will perform it later.

2.59