Getting started

Adjust the monitor speaker’s volume

You can set the volume of the monitor speaker, assuring that on-hook dialing will be as loud (or as soft) as you require.

1. Press MONITOR/CALL on the control panel. You now should hear a dial tone, and the display will show:

** Tel Mode **

2.

3.

Important: If you don’t hear a dial tone, make sure your fax machine is plugged into a working phone line.

If the volume you hear is satisfactory, skip to step 4.

Otherwise, proceed to step 3.

Adjust the volume as you wish:

To turn the volume up, press .

To turns the volume down, press .

The LCD indicates the volume. Here are the possible settings:

** Tel Mode ** Volume:

** Tel Mode ** Volume:

** Tel Mode ** Volume:

** Tel Mode ** Volume:

=Volume off.

=Low setting.

=Medium setting.

=Loudest setting.

4. Press MONITOR/CALL again to hang up.

1.17

Page 26
Image 26
Muratec MFX-1500 manual Adjust the monitor speaker’s volume