Beyond the basics
2.13
8. The display now shows either:
005:Alt. No.
_or 005:Alt. No.
9-1-555-789-3556_
You may now enter (or change) an alternate number, just as you entered the
regular number. This number, too, can be up to 40 characters long. During a
transmission or polling operation (see pages 2.31–2.33), your fax machine will
try to reach this alternate number only after failing with all redials (see pages
1.27–1.28) to the regular number. If all tries to the alternate number also fail,
the fax will sound a beeping alarm tone.
If you do not wish to enter or change an alternate number, skip to step 9.
If you do wish to enter or change an alternate number, do so by using the
numeric keypad the same way you did in step 6.
9. Press ENTER.
10. The display now shows:
005:Name :Upper
_or 005:Name :Upper
West Coast Sales_
The machine now is prompting you for a name — a Location ID, remember? —
so you’ll be able to find it easily in the EasyDial directory (see page 2.16).
If you do not wish to enter or change this number’s Location ID, skip to
step 12.
If you do wish to enter or change this number’s Location ID, proceed to
step 11.
11. A number’s Location ID may be up to 24 characters in length. You enter the
Location ID the same way you entered your fax name during EasyStart. We’ll
review the process, here. (If you���re changing a previously entered Location ID,
see the note at the end of this step.)
Important: As in EasyStart, you enter letters and other non-numeric
characters through the one-touch keys.
005:Name :Upper
_
The word “Upper” means the machine is currently set for entering only upper-
case letters. If you press R, the machine will see set it as an R (not an r).
To change it so that pressing a one-touch key will produce a lower-case letter
rather than an upper-case letter, press ALPHABET. The display will change to:
005:Name :Lower
_
This means pressing one-touch keys will enter lower-case letters: press ing R
will produce an r (not an R) on the display.
To switch back for upper-case entries, press ALPHABET again.
To enter spaces, punctuation and symbols, enter the characters shown on the
one-touch keypad you want.
To use CODE to enter a wide variety of characters, please review the
explanation on page 2.3. The vast majority of the time, you will probably find
the ALPHABET key to be sufficient.
Note: If you make a mistake or want to erase characters entered in a
previous setting, press CANCEL to erase leftward. Or, if you want to
change just one character in the name, press to move the cursor
leftward, or to move it rightward, to that character and press
CANCEL to erase it. Then re-enter until the name is just as you want it.
12. Press ENTER to save the setting and continue.
13. The display now shows:
005:Group No.
_or 005:Group No.
1,4,12_
You may now designate up to 32 call groups to which this number will belong.
(If necessary, review “Considering call groups,” page 2.9.)
If you do not wish to change this number’s call group status, skip to step 15.
If you do wish to change this number’s call group status, proceed to step 14.
14. Use the numeric keypad to enter the call groups to which this number will
belong. There are 32 possible call groups, numbered 1–32. (If you’re changing
a previous call group entry, see the note at the end of this step.)
This shows the entry of 6 to assign this speed-dial number to Call Group 6:
005:Group No.
6_
Note: You do not have to insert a leading zero for the call group number.
Note: To assign this number to all 32 call groups, enter 0 (zero).
If you want to assign the number to more than one call group, insert a comma
after each number (except the last one, of course) by pr essin g GR OUP D IAL.
This shows the entry of 6, GROUP DIAL, 7, GROUP DIAL, 1, 0 to assign this
speed-dial number to Call Group 6, 7 and 10:
005:Group No.
6,7,10_