Getting started
1.11
3. Unpack a new toner
cartridge from its carton.
Then, holding the toner
cartridge with both hands,
slowly shake it as shown
(note the arrows).
CAUTION
!:Do not throw the toner cartridge into the fire; this will
avoid any possibility of ignition an d/ or in jur y.
4. Place the new toner cartridge on a flat, clean surface.
5. Unpack the drum cartridge from its carton.
Important: Shield the drum cartridge from light, especially strong light.
Later, if you have to remove the cartridge from the fax,
immediately wrap it in a thick cloth to protect it from light.
6. Set the drum cartridge on the toner cartridge, making sure that the drum
cartridge’s two pins fit in the s lits inside the toner cartridge frame.
Developing roller
Note: Do not touch the developing roller.
7. Grip toner cartridge as shown,
to avoid pinching your fingers
between the toner cartridge
and the printer frame. Keep
the drum slot free of dust and
other foreign materials.
8. Gently install the toner
cartridge in the printer,
making sure the toner
cartridge’s four pins fit
in the slits inside the
printer frame.
9. Insert the fuser cleaner into
the slot in the fuser unit.
Fuser cleaner cleans the fuser
unit roller. You should
replace the fuser cleaner
every time you change the
new toner cartridge.
10. Close the printer cover.
11. Close the top cover. Be sure to push on a portion of the cover to lock it into
its original (closed) position.
Note: The fax machine will not work if the cover isn’t clo sed properly.
Keep the drum slot
free of dust and
other foreign materials.
Do not touch the
drum surface on
the cartridge’s bottom.