Muratec MFX-1500 manual Setting for legal-sized paper, Installing paper

Getting started

Setting for legal-sized paper

Your fax comes set for letter-sized paper. To set it to use legal-sized paper:

1. Unlock the pin from the upper set of holes by reaching inside of the paper cassette and pressing the nib, as shown.

2. Remove the pin.

3. Insert the pin into the middle set of holes. You will hear a click when it is locked into place.

4. Install the paper guide into the holes corresponding to the paper size you are installing.

Important: Remember, you’ve now told your fax that the paper cassette holds legal-sized paper. If you now try to use letter-sized paper without returning the pin to the upper holes (the setting for letter-sized), your fax will sound an alarm tone and display the following message when you try to print:

Check Rx Paper Size

Open&Close Top Cover

5. Be sure to attach the LGL sticker to the outside of the cassette to remind you which paper size it contains.

Installing paper

1. Open the paper cassette from the front of your fax by gently pulling it toward you.

2. Insert the paper into the cassette.

Note: Before you insert paper in the cassette, stack it so the leading edge and sides of the paper are even.

•Make sure the stack of paper isn’t higher than the limit mark on the side of the cassette.

•Place the edges of the top sheet under the metal tabs on the cassette’s

left and right side (as viewed from its front, as shown).

• The paper cassette can hold about 400 sheets of paper.

Note: Each of the two optional additional cassettes can hold about 200 sheets of paper. Thus, you can have

as many as 800 sheets of paper “on-line.” For more

details on these and other options for your fax machine, please contact your authorized Muratec dealer.

1.14