Muratec MFX-1500 manual Group DIAL, 2

GROUP DIAL

Beyond the bas cs

3. If you change your mind and wish to select a different programmable one- touch key, go back to step 2 before going on to step 4.

4. Press ENTER. The display now shows either:

77:Fax Number	or	77:Fax Number
_		9-5558743

5. Use the numeric keypad to enter the “hub” machine’s number exactly as your machine should dial it, including whatever codes your phone system may require. The number can be up to 40 characters in length:

77:Fax Number 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20 (such as with an international long-distance numbers),

press to scroll leftward or to scroll rightward.

Important: Do not press ENTER.

Note: If you make a mistake or want to erase characters entered in a previous setting, press CANCEL to erase leftward. Or, if you want

to change just one character in the number, press to move the

cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the number is just as you want it.

6. Now, while you still can see the fax number on the display, press

COMMUNICATION OPTIONS three times and then press ENTER. The

display shows:

Relay Tx

Group No. _

7. Use the numeric keypad to enter the two-digit identifier (01–32) for the first call group. You can specify up to 10 separate groups for each relay broadcast initiation; between the entry of each new group, press

to insert a comma but do not insert a comma after the last group number. For example, here, we’ve entered 0, 4, GROUP DIAL, 1, 1,

GROUP DIAL, 2, 4:

Relay Tx

Group No. 1,24_

Note: The display shows only four characters of the group number.

Important: Again, do not insert a comma after the last group number.

When the entry is complete, press ENTER.

8. If you want the transmission to begin immediately every time you press the key, press ENTER again and skip to step 11.

If you want to delay the transmission (perhaps to take advantage of lower

phone rates), press COMMUNICATION OPTIONS, ENTER.

9. There’s a choice to make. Instruct your fax to carry out this delayed command in one of the following ways:

Option 1: Perform the command once at a certain time on a certain day of the month (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 (i. e., 00), and then the time when the fax could perform the command:

Delayed

Enter Time: 00/17:05

10. Press ENTER, ENTER.

11. The display now shows the next programmable one-touch key.

If you do not wish to enter or change any other key’s programming, press STOP to return your machine to its usual standby mode.

If you do wish to enter or change this key’s programming, go back to step 3. If you wish to enter or change another key’s programming, go back to step 2.

2.64