Muratec MFX-1500 6. , 7. , 8. , 9. , 10. , 2. , 3. , 4. , 5. , 6. , 7.

Beyond the basics

2.4

Enter Fax Number

01:_ or Select BlockJunk No.

01:555-2208

If you have not entered a fax number into this slot in the list, skip to ste p 7 .

Otherwise, proceed to step 6.

6. If you wish to modify an existing entry in the blocked numbers list, press or

repeatedly until you see the number you wish to modify.

… or …

If you wish to enter a new number in an already-started blocked numbers list,

press or repeatedly until you find an empty position in the list (as in the

first display in step 5).

Note: To clear a number from the list, see “Cleari ng a number from the blocked

numbers list,” right column.

7. Use the numeric keypad to enter the last eight characters of a fax number you

wish to block. For example, if you wish to block a fax from someone with a

Subscriber id of 972-555-3038, you should enter 5, 5, 5, -, 3, 0, 3, 8:

Enter Fax Number

01:555-3038

To change only a specific digit of an entry, press to move leftward or to

move rightward until the cursor is under the digit, then use the numeric keypad to

enter the correct digit.

8. Press ENTER to save the setting. The display will sh ow the next “slot” in the

blocked numbers list.

Enter Fax Number

02:_

If you do not wish to enter or change a fax number, proceed to step 9.

If you do wish to enter another fax number, repeat steps 5–8.

9. Press STOP. The display now asks whether you want to print blocked numbers list.

Print BlockJunk Dial

Enter/Stop

10. If you do want to print the list, press ENTER and your machine will print it.

If you don’t want to print a list, press STOP and your machine will return to normal

standby mode.

Clearing a fax number from the blocked numbers list

To clear a number from the list.

1. If the machine is in Fax mode, proceed to step 2.

If it is in Copy mode, press COPY/FAX to change to Fax mode.

2. Press PROGRAM, J, 1, 1, ENTER. The display shows the current Block Junk Fax

setting:

Block Junk Fax:Off

Program/Enter

If the setting is either Mode 2 or Mode 3, skip to step 4.

If the setting is either Off or Mode 1, proceed to step 3.

3. Press PROGRAM until your see your preference, Mode 2 or Mode 3.

In this example, we’ve chosen Mode 2.

Block Junk Fax:Mode2

Program/Enter

4. Press ENTER twice. The display shows:

Select BlockJunk No.

01:555-0911

If this is the fax number you wish to clear from the list, skip to step 6.

Otherwise, proceed to step 5.

5. Press PROGRAM repeatedly until you see the number you wish to clear from the

list.

6. Press CANCEL to clear the number.

To clear another number from the blocked numbers list, repeat steps 5–6.

Otherwise, proceed to step 7.

7. Press STOP. The display now asks whether you wish to print the current blocked