Muratec MFX-1500 manual Press ENTER. The display will show either

Beyond the bas cs

11. Use the numeric keypad to enter exactly the sub-address to identify this F- Code box.

Note: The sub-address must be unique to this F-Code box; i. e., no other F-Code box in this fax machine can have the same sub-address.

The sub-address can be up to 20 numbers in length. In this example, we’ve entered 654321.

03:Sub-Address No. 654321_

Note: To erase previously entered characters, press CANCEL to erase leftward. Or to change just one character in the number, press

to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the number is just as you want it.

12. When the number is as you want it, press ENTER to store it.

Note: If you entered a sub-address number already being used by another F-Code box, the machine will beep and briefly display the following:

03:Enter Sub-Address Sub-Address In Use

The machine now returns you to step 11. Please enter a different number for your F-Code box’s sub-address.

13. Next, the machine asks for your F-Code box’s password. This is the password for ITU-T-compatible F-Code fax transactions. (It is not a passcode your machine uses to control who can make settings for the box.) If you set the password, a caller must know and use it in order to send a fax to you via F-Code communication. You don’t have to have a password to use the F-Code box. However, using a password will make your F-Code communications much more secure.

Important: Again, this is the password for ITU-T-compatible F-Code fax transactions. It’s not the passcord the machine can use to control user access to the F-Code box for, as an example, making settings. You’ll make that setting a few steps down the line.

Depending on whether you already have a password entered for your F-Code box, the display displays either:

03:Password	or	03:Password
_		123456789*#_

If you do wish to enter or change this box’s password, proceed to step 14. If you do not wish to enter or change this box’s password, skip to step 15.

14. Use the numeric keypad to enter this box’s ITU-T-compatible password. This password can be up to 20 characters in length and can include any combination of numbers and the * and # characters (but no other non- numerical characters). Here, we’ve entered 135*7#9.

03:Password 135*7#9_

Note: To erase previously entered characters, press CANCEL to erase leftward. Or to change just one character in the password, press to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the password is just as you want.

15. Press ENTER. The display will show either:

Box Type :Bulletin	or	Box Type :Security
Program/Enter		Program/Enter

The machine is asking which box type you wish to assign to this box — bulletin or security.

To select your desired box type (if it’s not already on the display), press PROGRAM to display your choice.

16. Press ENTER.

If you chose Bulletin in step 15, proceed to step 17. If you chose Security in step 15, skip to step 22.

2.51